在注塑加工時，具體操作的一些時間因素也會影響到注塑產品的質量，要想做好注塑產品，這可是一門手藝，是需要一定的操作的，不只需要非常熟練的手法，還對具體時間的把控有著嚴格的要求，下面就來說說影響濟南注塑墨跡加工的時間因素有哪些。
In injection molding processing, some time factors of specific operation will also affect the quality of injection molding products. In order to do a good job of injection molding products, it is a craft and requires certain operation. It not only requires very skilled techniques, but also has strict requirements for the control of specific time. Let's talk about the time factors affecting injection molding ink processing in Jinan.
一、射膠時間
1、 Glue injection time
在注塑產品的加工中，射膠不僅能夠?qū)崿F(xiàn)保護產品的作用，還能夠讓產品更加有光澤，不過要掌握好射膠的時間可不是一件容易的事，因?yàn)樵谏淠z時不僅僅要考慮射膠的時間，還要考慮到壓力，速度和溫度等等一系列因素，所以說是很難把控的。
In the processing of injection molding products, glue injection can not only protect the products, but also make the products more shiny. However, it is not easy to master the time of glue injection, because it is difficult to control not only the time of glue injection, but also a series of factors such as pressure, speed and temperature.
二、低壓保護時間
2、 Low voltage protection time
在這時間里，就要將保護的時間設置成為兩秒，不過在根據具體的情況，在多加零點幾秒的延遲，這樣才能夠起到低壓保護的作用。
In this time, first of all, set the protection time to two seconds, but according to the specific situation, add a delay of a few tenths of a second, so as to play the role of low-voltage protection.
三、冷卻時間
3、 Cooling time
冷卻時間要根據產品具體的形狀太設定，但是冷卻時間要大于溶膠時間，要讓產品充分的定型才可以。
The cooling time should be set according to the specific shape of the product, but the cooling time should be greater than the sol time, and the product should be fully shaped.
四、保壓時間
4、 Pressure holding time
為了保證濟南注塑墨跡產品的尺寸規格大小能夠符合要求，保壓時間是非常重要的，保壓的時候?qū)⑷芤旱沽髦白対部诶鋮s，這個時間可以根據澆口來決定。
In order to ensure that the size of Jinan injection ink products can meet the requirements, the pressure holding time is very important. During the pressure holding, let the gate cool before the solution flows back. This time can be determined according to the gate.
